Work is moving forward. This past week I took a break from refurbishing parts and actually put a few on the car. I reinstalled the 2 piece tub and riveted in place. Fiberglassing the seems to follow. I reinstalled the rear inner fenders which are a little tricky to get back in lining up the old rivet holes. Next is the pedal board which is a straight forward task, then the steering. I learned from last time to make sure all the parts easily slide together easily before you install. You need to start from the steering rack and individually slide each part in place working towards the steering wheel. I also stripped the aluminum gas tanks with aircraft paint stripper and a power washer. They cleaned up fairly easy. On the bottom of the pedal board there is a ring nut which socket is difficult to find but is a Ferrari tool FR 104. Luckily my friends at Cavallo Motorsorts in Carlsbad loaned me one. A decision has to be made soon on weather or not to replace the wiring harness as it is one of the first thing that need to be installed.